Addressable RS485/422 to 2-WIRE Current Loop CLO Baud Rate Converter
ADA-4028LA

Addressable RS485/422 to 2-WIRE Current Loop CLO Baud Rate Converter* The prices are given in the response to the offer.
  • Possibilities of adding the address to no-addressable device, connected to Current Loop CLO port.
  • The conversion of parameters and baud rate on RS485/422 and CLO ports of the converter ,
  • Operating on 2-wire bus in Current Loop standard,
  • Operating up to 4 devices on Current Loop bus,
  • Operating on 2-wire or 4-wire bus in point-to-point and multipoint topology,
  • Operating up to 32 devices on RS485 bus,
  • The baud rate (bps) on Current Loop CLO: 300, 600, 1200, 1800, 2400, 4800, 7200, 9600, 14400, 19200,
  • The Current Loop CLO data format: Number of data bites: 5, 6, 7, 8; Parity: None, Odd, Even; Number of stop bits : 1, 2,
  • The baud rate (bps) on RS485/422: 300, 600, 1200, 1800, 2400, 4800, 7200, 9600, 14400, 19200, 28800, 38400, 57600, 76800, 115200, 230400,
  • The RS485/422 data format: Number of data bites: 5, 6, 7, 8; Parity: None, Odd, Even; Number of stop bits : 1, 2,
  • Transparent for all protocols which data format is in accordance with the above specifications of Current Loop and RS485/422 interfaces,
  • Power supply 10 - 30 VDC stable,
  • 3kV= optoizolation in signal channel between Current Loop interface and RS485/422 interface,
  • 1kV= or 3kV= galvanic isolation between RS485/422 interface and power supply,
  • 1kV= or 3kV= galvanic isolation between Current Loop CLO interface and power supply,
  • Implemented short circuit protection and over-voltage protection on the lines RS485/422 interface,
  • Implemented short circuit protection and over-voltage protection on the lines Current Loop interface,
  • Protection against power supply reverse connection,
  • Connection of RS485/422 bus and power supply via screw terminal block, cross section up to 2.5 mm2,
  • Connection of Current Loop CLO via screw terminal block, cross section up to 2.5 mm2,
  • DIN 43880 standard - mounting in typical electro-installation unit,
  • Rail mounting according to DIN35 / TS35 standard,
  • Dimensions (W x D x H) 53mm x 62mm x 90mm.